Description
VapeBrat Copa Pro LCD Enail: 20mm Quartz Banger E-Nail
LCD E-Nail Controller Box, 20mm Barrel Coil, Dual Size Quartz E-Nail Banger: 14mm-18mm Male 90 Degree, Flat Top Carb Cap with Dab Tool
The VapeBrat Copa Pro Enail Kit is a convenient way to dab on without the use of a big bulky and potentially dangerous torch. This desktop enail is designed to heat either nail (not included) or banger to your specific desired temperature in a matter of seconds.
The VapeBrat LCD features a customized PID for more accurate temperature readings with a less temperature fluctuation than the VapeBrat Micro. Even though you can run this thing to almost 1000 degrees, its probably best if you stick around 500-650 degrees for a grade A dabbing experience. The digital display shows set temp and the actual temperature of the coil or heated surface, giving the user that added accuracy needed to achieve that perfect dab every time.
The Dual Size E-Nail banger included in this kit is meant to fit most rigs, this Banger is a 90 degree Male but can fit 14mm and 18mm joint sizes. The VapeBrat Copa comes with a set carb cap, for the quartz banger that features an extended dab tool on it for easy loading and capping.
Lastly the VapeBrat Quartz Banger Enail Kit comes with a 20mm Barrel Enail Coil for optimal heat transfer to a majority of the side walls of the enail banger. This Barrel Enail Coil is made out of Nickel Chromium Stainless Steel and a kevlar sheath. Nickel and Chromium also known as NiChrome has the ability to heat up to higher temperatures however it has more resistance. Since this metal has more resistance towards electrical current, it heats up more slowly than other metals. NiChrome is known to withstand high temperatures without oxidizing, being damaged, or warping.
Specifications:
LCD PID Controller Box:
- Temperature Range: 0°F to 1000°F
- Size: 4.7" x 3" x 1.6"
- Display: LCD Digital - Set Value and Coil Temp - Touch Screen
- Input: 110V - 250V
- Coil Connection: 5PIN Female XLR
- Pin Set Up: PIN 1: TC-, PIN 2: TC+, PIN 3: Ground, PIN 4: AC, PIN 5: AC
NOTE: VapeBrat Enail Coils are only made to be used with VapeBrat Enail Controller Boxes and may not be compatible with other brands. DO NOT attempt to pair VapeBrat Enail Coils with other brand controller boxes.
Dual Size Quartz Enail Banger:
- Joint Size: 14mm-18mm
- Joint Angle: 90 Degree
- Joint Gender: Male
- Banger Bucket Diameter: 16mm
- Banger Bottom Diameter: 20mm
- Bottom Thickness: 2mm
- Neck Connection: Regular Weld
- Top Style: Flat
Flat Top Angled Carb Cap and Dab Tool:
- Outer Diameter: 26mm
- Inner Diameter: 23mm
- Length: 3.42 Inches
20mm Barrel Enail Coil:
- Size: 20mm - Compatible with 20mm Diameter Bangers
- Coil Style: Barrel
- Coil Material: Nickel Chromium Stainless Steal
- Sheath: Kevlar
- Thermocouple: K Type
Features:
- Controller Box Low Energy Usage
- Can be Used with 250V 6 Amp Fuse - Fuse Protection
- Steady Temperature Control With No Overshoot
- Controller Box Contains a PID Microprocessor
- Quick Heat Up
- ON/OFF Touch Button for Box
- Quartz Bucket with Flat Top with a Thick 2mm Bottom
- Dual Size to Fit 14mm and 18mm Rigs
- Extended Quartz Arm to Hold Enail Coil
Includes:
- 1 x VapeBrat LCD Enail Controller Box with LCD Display
- 1 x VapeBrat Regular Weld Dual Size Quartz E-Nail Banger: 14mm-18mm Male 90 Degree
- 1 x VapeBrat Flat Top Angled Carb Cap and Dab Tool
- 1 x 5ft 20mm Barrel Enail Heater Coil
- 1 x 6ft Long Power Cord
- 2 x Silicone Jars
- Travel Case Sold Separately
- Instruction & Troubleshooting Manual - Page 1 Page 2
- BONG NOT INCLUDED
