Description
VapeBrat Electric Nectar Collector Enail Kit
The VapeBrat Nectar Collector Enail utilizes the VapeBrat X2 Nectar Collector, a Titanium Nail, and a 10mm Barrel Enail Coil which fits any Nectar Collector Nail with a 10mm Tip! Turn any ordinary Nectar Collector into an Enail Nectar Collector with this kit!
With all the features you could ever ask for and more!
The VapeBrat Nectar Collector Enail Kit features a Micro Enail Controller Box.
Micro Enail Controller Box:
- The VapeBrat Micro Enail Controller Box is able to achieve super high temps in a matter of 2 minutes or less. The Micro features a customized PID for more accurate temperature readings with a slight fluctuation of about 0.2%. Temperature can be set anywhere from 0-999 Degrees based on preference, even though you can run this thing to almost 1000 degrees, its probably best if you stick around 500-650 degrees for a grade A dabbing experience. The digital display shows set temp and not the actual temperature of the coil or heated surface, but with the help of the Octave or Terpometer, for added accuracy, you can achieve that perfect dab every time. Just set this enail to your desired temp and dab on my fellow VapeBrat... dab on!
The VapeBrat Kit also comes with a VapeBrat X2 Nectar Collector:
VapeBrat X2 Nectar Collector:
- The VapeBrat X2 Nectar Collector Water Bubbler is a premier hand blown borosilicate glass piece, designed to be completely spill proof. The VapeBrat X2 houses a dome percolator, it contains multiple holes at the bottom which pull your vapors into the filtration chamber as you inhale. The construction of the VapeBrat X2 Glass Bubbler allows for maximum diffusion and filtering of your dabs, which in turn delivers the purest, full flavored, smoothest hits. The VapeBrat X2 can be used with any 14mm Joint Nectar Collector Nail, the holes at the bottom of the percolator should be about one centimeter beneath the water level for optimal performance.
14mm Titanium Nail:
- The Titanium Nail featured on the VapeBrat X2 has a 14mm Male joint connection to fit any standard 14mm Female Nectar Collector Bubbler. Titanium is ideal for high temperature dabs, it takes a bit longer to heat up than other materials. However, it retains heat longer than quartz would and cools off faster than ceramic. Titanium Nails can reach temperatures upwards of almost 1,500 degrees, (needless to say, you shouldn't run your enail to THAT high of a temperature in any circumstance) its ability to withstand super high temperatures shows how durable and reliable titanium really is.
Lastly the VapeBrat Nectar Collector Enail Kit comes with a 10mm Barrel Coil.
10mm Barrel Coil:
- The 10mm Barrel Enail Coil is paired up with the VapeBrat X2 Nectar Collector for optimal heat transfer to the 14mm Titanium Nail. This coil design covers the entire nectar collecting tube for precision heating for your concentrates.
The Barrel Enail Coil is made out of Nickel Chromium Stainless Steel and a kevlar sheath. Nickel and Chromium, also known as NiChrome, has the ability to heat up to higher temperatures however it has more resistance. Since this metal has more resistance towards electrical current, it heats up more slowly than other metals. NiChrome is known to withstand high temperatures without oxidizing, being damaged, or warping. It is also noncorrosive!
The VapeBrat Micro Enail is the most advanced and reliable digital enail to hit the market!
Specifications:
Micro PID Controller Box:
- Temperature Range: 0°F to 999°F
- Size: 5" x 3.5" x 1.5"
- Display: Flat Digital - Set Value
- Coil Connection: 5PIN Female XLR
- Temperature Precision: 0.2% FS
10mm Barrel Enail Coil:
- Size: 10mm - Compatible with 14mm Titanium Nails
- Coil Style: Barrel
- Coil Material: Nickel Chromium Stainless Steal
- Sheath: Kevlar
- Thermocouple: K Type
14mm Titanium Nail:
- Joint Size: 14mm
- Joint Gender: Male
- Joint Angle: Straight - For Nectar Collectors
- Height: 3 Inches
- Material: Grade 2 Titanium
VapeBrat X2 Nectar Collector:
- Joint Size: 14mm
- Joint Gender: Female - Compatible with 14mm Male Nails
- Height: 6 Inches When Assembled
- Percolator: Inline Perc
Features:
- Controller Box Low Energy Usage
- Compact Kit - Comes with 8.5" x 6" x 3" Travel Case
- Can be Used with 250V 6 Amp Fuse - Fuse Protection
- Steady Temperature Control With Almost No Overshoot
- Controller Box Contains a PID Microprocessor
- Quick Heat Up
- ON/OFF Push Button for Box
- Upgrade Any Nectar Collector to An Enail Nectar Collector
- 10mm Barrel Coil Style for Top Notch Heat Distribution
- VapeBrat X2 Bubbler for Water Filtration
Includes:
- 1 x VapeBrat Micro Enail Controller with Digital Display
- 1 x VapeBrat X2 Nectar Collector Bubbler
- 1 x 14mm Titanium Nail for Nectar Collector
- 1 x 10mm Barrel Coil
- 1 x 6ft Long Power Cord
- 1 x Keck Clip
- 1 x O-Clamp
- 2 x Silicone Jars
- Travel Case Sold Separately
- Instruction & Troubleshooting Manual
