Description
VapeBrat Slurper Set: Terp Slurper Column Enail Kit
30mm Axial Coil, Micro Enail Controller Box, Terp Slurper Column Banger, and Slurper Screw with Marble
The VapeBrat Slurper Set Enail utilizes a Terp Slurper Column Banger, a 30mm Axial Coil, and a Slurper Screw Set to achieve the most flavorful and milkiest dabs known to man!
The VapeBrat Slurper Set Features a Micro Enail Controller Box:
- The VapeBrat Micro Enail Controller Box is able to achieve super high temps in a matter of 2 minutes or less. The Micro features a customized PID for more accurate temperature readings with a slight fluctuation of about 0.2%. Temperature can be set anywhere from 0-999 Degrees based on preference, even though you can run this thing to almost 1000 degrees, its probably best if you stick around 500-650 degrees for a grade A dabbing experience. The digital display shows set temp and not the actual temperature of the coil or heated surface, but with the help of the Octave or Terpometer, for added accuracy, you can achieve that perfect dab every time. Just set this enail to your desired temp and dab on my fellow VapeBrat... dab on!
The VapeBrat Slurper Set Enail Kit also comes with a Terp Slurper Column Banger and a Slurper Screw Set.
Terp Slurper Enail Banger with Marble Set:
- The Terp Slurper Column Enail Banger allows for the same mesmerizing, terp liberating functions of a regular terp slurper, however this banger has an extended quartz rod sticking out from the bottom "terp dish" to secure your enail coil in place by a 8mm o-clamp, reducing the risk of the coil falling off and potentially burning you or anything under it. The Terp Slurper Enail Banger also features a beveled top to create a tight seal for a marble carb cap. When a terp slurper is paired with a marble set, the terp screw helps to diffuse the airflow and move around your concentrates so that all materials evaporate inside the heated chamber. The large marble thats placed on top is used as a carb cap, capping the airflow so that all the air is directed from the slits at the bottom of your terp slurper, drawing your wax into the heated bottom chamber. For ultimate flavor and to get the most out of your terpenes its best to dab at relatively low temperatures. This enail banger is fully welded for increased durability making it less likely to break where the two pieces of quartz are normally joined together.
Note: This Terp Slurper Column E-Nail Banger can be used with either a flat coil or a 30mm coil.
Lastly the VapeBrat Slurper Set comes with a 30mm Axial Enail Coil.
30mm Axial Enail Coil:
- This 30mm Axial Enail Coil is compatible with any Bucket Banger that has a 30mm diameter bottom, Terp Slurper Bangers with a 30mm bottom dish, any Titanium nail, or Hybrid Nail that either utilize a 30mm dish.
Axial Enail Coils cover the entire bottom surface of a banger and a portion of the banger walls. Axial coils are shaped like a bucket, designed to fit perfectly to the bottom of your banger and is held in place by a cotter pin or an o-clamp. Axial coils are meant to heat your banger to higher temperatures and for even heat distribution.
NOTE: This coil is only made to be used with VapeBrat Enail Controller Boxes and may not be compatible with other brands. DO NOT attempt to pair VapeBrat Enail Coils with other brand controller boxes.
Specifications:
Micro PID Controller Box:
- Temperature Range: 0°F to 999°F
- Size: 5" x 3.5" x 1.5"
- Display: Flat Digital - Set Value
- Coil Connection: 5PIN Female XLR
- Temperature Precision: 0.2% FS
Terp Slurper Column Enail Banger:
- Joint Size: 14mm
- Joint Angle: 90 Degree
- Joint Gender: Male
- Banger Bucket Diameter: 16mm
- Banger Wall Thickness: 3mm
- Banger Bottom Diameter: 30mm
- Banger Bottom Thickness: 4mm
- Neck Connection: Fully Welded
- Top Style: Beveled
Slurper Screw Set:
- Marble Cap Diameter: 22mm
- Terp Screw: 30mm Long x 14mm Top x 7mm Thick
30mm Axial Enail Coil:
- Length: 4.4ft
- Coil Connection: 5PIN Female XLR
- Coil Style: Axial
- Coil Size: 30mm
- Fireproof Kevlar Sheath
- Pin Set Up: PIN 1: TC-, PIN 2: TC+, PIN 3: Ground, PIN 4: AC, PIN 5: AC
Features:
- Controller Box Low Energy Usage
- Compact Kit - Comes with 8.5" x 6" x 3" Travel Case
- Can be Used with 250V 6 Amp Fuse - Fuse Protection
- Steady Temperature Control With Almost No Overshoot
- Controller Box Contains a PID Microprocessor
- Quick Heat Up
- ON/OFF Push Button for Box
- Terp Slurper Column Banger with Screw Set Combination for More Evenly Heated Dabs
- 30mm Axial Coil Style for Top Notch Heat Distribution
- Pin Set Up: PIN 1: TC-, PIN 2: TC+, PIN 3: Ground, PIN 4: AC, PIN 5: AC
NOTE: VapeBrat Enail Coils are only made to be used with VapeBrat Enail Controller Boxes and may not be compatible with other brands. DO NOT attempt to pair VapeBrat Enail Coils with other brand controller boxes.
Includes:
- 1 x VapeBrat Micro Enail Controller with Digital Display
- 1 x VapeBrat Fully Welded Terp Slurper 14mm Male 90 Degree Angle
- 1 x Terp Slurper Screw
- 1 x Marble Carb Cap
- 1 x 30mm Axial Coil
- 1 x 6ft Long Power Cord
- 2 x Silicone Jars
- Travel Case Sold Separately
- Instruction & Troubleshooting Manual - Page 1 Page 2
- BONG NOT INCLUDED
