Description
VapeBrat Tres Pro LCD Enail: Terp Slurper E-nail - Titanium E Nail and Quartz Electric Nail Kit
LCD E-Nail Controller Box, 20mm Barrel E-Nail Coil, 25mm Terp Slurper E Nail Coil, Dual Size Quartz E-Nail Banger, Flat Top Carb Cap with Dab Tool, Terp Slurper Enail Banger, Terp Slurper Marble Set, 20mm Titanium Nail, and Titanium Carb Cap
The VapeBrat Tres Pro Enail Kit is a convenient way to medicate without the use of a big bulky and potentially dangerous torch, and contains everything needed to get you dabbing right away. This desktop enail is designed to heat either nail or bangers included in this set to your specific desired temperature in a matter of seconds. The VapeBrat Tres Enail Coils contains an advanced thermocouple sensor ensuring perfect temperature dabs every time.
The VapeBrat LCD Enail Controller Box is able to achieve super high temps in a matter of seconds. The VapeBrat LCD features a customized PID for more accurate temperature readings with a less temperature fluctuation than the VapeBrat Micro. Temperature can be set anywhere from 0-1000 Degrees based on preference, even though you can run this thing to almost 1000 degrees, its probably best if you stick around 500-650 degrees for a grade A dabbing experience. The digital display shows set temp and the actual temperature of the coil or heated surface, giving the user that added accuracy needed to achieve that perfect dab every time. Just set this enail to your desired temp and dab on my fellow VapeBrat... dab on!
The Dual Size E-Nail banger included in this kit is meant to fit most rigs, this Banger is a 90 degree Male but can fit 14mm and 18mm joint sizes. The VapeBrat Copa comes with a set carb cap, for the quartz banger that features an extended dab tool on it for easy loading and capping.
Note: This E-Nail Banger can only be used with 20mm Barrel Enail coils.
The Titanium Nail included in the VapeBrat Tres Pro LCD Enail features a universal joint and gender fitting. The top diameter of this nail is 20mm and it fits any standard 20mm barrel enail coil. This titanium nail is ideal to be used with a desktop enail because it features an elongated top portion just below the dish to fit the size of a barrel coil and hold it in place! The Universal 20mm Titanium Nail also features a flat top and a 4mm dish depth for those extra large dabs. Just pair this versatile piece with the included titanium nail carb cap with a dab tool and you're golden!
Lastly the VapeBrat Tres Pro LCD Enail comes with both a 25mm Terp Slurper Enail Coil and a 20mm Barrel Enail Coil for optimal heat transfer to a majority of the side walls of either enail banger or nail.
The VapeBrat Enail Coil design covers the banger to minimize pooling and waste. The Barrel Enail Coil and the Terp Slurper Enail Coil are made out of Nickel Chromium Stainless Steel and a kevlar sheath. Nickel and Chromium also known as NiChrome has the ability to heat up to higher temperatures however it has more resistance. Since this metal has more resistance towards electrical current, it heats up more slowly than other metals. NiChrome is known to withstand high temperatures without oxidizing, being damaged, or warping. It is also noncorrosive!
The VapeBrat Tres Pro LCD Enail also comes with a Terp Slurper E-Banger which allows for the same mesmerizing, terp liberating functions of a regular terp slurper, however this banger has an extended quartz rod sticking out from the bottom "terp dish" to secure your enail coil in place by a 8mm o-clamp, reducing the risk of the coil falling off and potentially burning you or anything under it. The Terp Slurper Enail Banger also features a beveled top to create a tight seal for a marble carb cap, increasing the airflow through the bottom creating a vacuum effect that terp slurpers are known for. The overall construction is standard, a bucket top, tube, and dish at the bottom, however this enail banger is fully welded for increased durability making it less likely to break where the two pieces of quartz are normally joined together.
Note: This E-Nail Banger can be used with either a flat coil or a 25mm coil.
The VapeBrat Terp Slurper Enail Banger wouldn't be complete if it didnt come with a marble set. Marble sets increase efficiency and lets face it, they look flippin awesome in action. Terp pills have totally changed the game when it comes to taking proper dabs from a terp slurper. Marble Sets are highly innovative dabbing accessories that also serve an important functional purpose as well. When a terp slurper is paired with a marble set, the bottom terp pill helps to diffuse the airflow and move around your concentrates so that all materials evaporate inside the heated chamber, the middle marble is used to keep the terp pill from flying out. Lastly the largest marble is used as a carb cap, capping the airflow so that all the air is directed from the slits at the bottom of your terp slurper, drawing your wax into the heated bottom chamber. For ultimate flavor and to get the most out of your terpenes its best to dab at relatively low temperatures.
Specifications:
LCD PID Controller Box:
- Temperature Range: 0°F to 1000°F
- Size: 4.7" x 3" x 1.6"
- Display: LCD Digital - Set Value and Coil Temp - Touch Screen
- Input: 110V - 250V
- Coil Connection: 5PIN Female XLR
- Pin Set Up: PIN 1: TC-, PIN 2: TC+, PIN 3: Ground, PIN 4: AC, PIN 5: AC
NOTE: VapeBrat Enail Coils are only made to be used with VapeBrat Enail Controller Boxes and may not be compatible with other brands. DO NOT attempt to pair VapeBrat Enail Coils with other brand controller boxes.
Dual Size Quartz Enail Banger:
- Joint Size: 14mm-18mm
- Joint Angle: 90 Degree
- Joint Gender: Male
- Banger Bucket Diameter: 16mm
- Banger Bottom Diameter: 20mm
- Bottom Thickness: 2mm
- Neck Connection: Regular Weld
- Top Style: Flat
Note: You can change the Gender and Angle to fit your dab rig by choosing a different selection from the options menu on the right of the product page.
Flat Top Angled Carb Cap and Dab Tool:
- Outer Diameter: 26mm
- Inner Diameter: 23mm
- Length: 3.42 Inches
Universal Titanium Nail:
- Joint Size: 10mm 14mm 18mm
- Joint Gender: Male Female
- Joint Angle: Straight - Compatible with 90 Degree Joint Rigs
- Nail Diameter: 20mm
- Nail Depth: 4mm
Titanium Carb Cap with Dab Tool:
- Outer Diameter: 25mm
- Inner Diameter: 23mm
Terp Slurper Enail Banger:
- Joint Size: 14mm
- Joint Angle: 90 Degree
- Joint Gender: Male
- Banger Bucket Diameter: 22mm
- Banger Bottom Diameter: 25mm
- Neck Connection: Fully Welded
- Top Style: Beveled
Note: You can change the Gender and Angle to fit your dab rig by choosing a different selection from the options menu on the right of the product page.
Marble Set:
- Large Carb Cap Marble: 23mm Diameter
- Middle Smaller Marble: 15mm Diameter
- Terp Pill: 5mm Diameter
Terp Slurper Enail Coil:
- Size: 25mm - Compatible with 25mm Diameter Bangers
- Coil Style: Axial - Double Wrap
- Coil Material: Nickel Chromium Stainless Steal
- Sheath: Kevlar
- Thermocouple: K Type
20mm Barrel Enail Coil:
- Size: 20mm - Compatible with 20mm Diameter Bangers
- Coil Style: Barrel
- Coil Material: Nickel Chromium Stainless Steal
- Sheath: Kevlar
- Thermocouple: K Type
Features:
- Controller Box Low Energy Usage
- Can be Used with 250V 6 Amp Fuse - Fuse Protection
- Steady Temperature Control With No Overshoot
- Controller Box Contains a PID Microprocessor
- Quick Heat Up
- ON/OFF Touch Button for Box
- Titanium Nail Universal Size and Gender
- Can be Used with Male and Female Joint Rigs
- Can be Used with 10mm, 14mm, and 18mm Joint Size Rigs
- Quartz Bucket with Flat Top with a Thick 2mm Bottom
- Dual Size to Fit 14mm and 18mm Rigs
- Extended Quartz Arm to Hold Enail Coil
- Terp Slurper with Marble Set Combination for More Evenly Heated Dabs
- Terp Slurper Axial Coil Style for Top Notch Heat Distribution
Includes:
- 1 x VapeBrat LCD Enail Controller Box with LCD Display
- 1 x VapeBrat Regular Weld Dual Size Quartz E-Nail Banger: 14mm-18mm Male 90 Degree
- 1 x VapeBrat Flat Top Angled Carb Cap and Dab Tool
- 1 x VapeBrat Universal Titanium Nail (Fits 10mm/14mm/18mm Male and Female)
- 1 x VapeBrat Titanium Dab Tool Carb Cap
- 1 x VapeBrat Fully Welded Terp Slurper 14mm Male 90 Degree Angle
- 1 x Marble Pill 3 Piece Set
- 1 x O-Clamp
- 1 x 14mm to 18mm Female to Male Adapter
- 1 x 5ft 20mm Barrel Enail Heater Coil
- 1 x 6ft Long Power Cord
- 2 x Silicone Jars
- Travel Case Sold Separately
- Instruction & Troubleshooting Manual - Page 1 Page 2
- BONG NOT INCLUDED
Quick Tip:
Having the right banger can make a world of difference to your dabbing experience. Bangers are one of those items that warrant a bit of a splurge to make sure your experience is as elevated as can be. But the main component to consider is how well you take care of your banger to ensure it stays clean and fresh for each hit.
#4. Banger Thickness
There are 2 different measurements for thickness, there is the wall thickness and then there is the bottom thickness. The thicker the bottom and walls, the greater the heat retention and overall durability of the banger. Thickness does come at a cost. Using an extremely thick bottom banger will take longer to heat, however it will retain the heat longer. This would be important for those looking to maintain banger temperature while placing large amounts of concentrates into the bucket banger.
#5. Banger Accessories
While picking your banger, it is also important to note and pay attention to the kind of accessories you pair with it, such as a carb cap, terp pearls or pills, and marbles.
Bucket Inserts: Varying in shape and size, bucket inserts offer a great cold start option or can be used for super heat retention.
Terp Pearls: Also known as Banger Beads or Terp Balls, these are small quartz balls, placed inside the banger (1 or 2) which when paired with the appropriate directional airflow carb cap (namely a vortex carb cap) spin around the banger during inhalation. The spinning of the terp pearls helps evenly distribute the concentrate across the surface area of the banger, preventing hot spots, and creating an evenly heated area for a consistent experience. This allows for a higher vaporization rate even at lower temps as the saturation rate is evenly distributed.
Carb Caps: There are just as many different types of carb caps as there are bangers, but there are two things to concern yourself with, the carb cap size, and style / functionality. The most popular carb caps have an airflow design that allows for your concentrates to evenly distribute in the banger, preventing pooling, and allowing the concentrated to evenly vaporize. When choosing inserts, such as terp pearls, getting a vortex carb cap or directional carb cab is crucial in making the pearls function properly.
Reclaim Catchers: Possibly the most important accessory, a reclaim catcher is used to catch the concentrates that get sucked down the banger neck. Reclaim catchers keep your pipe clean by preventing that reclaim from falling directly into your pipe, and more importantly are able to gather the excess concentrates for use later on! Even when using a reclaim catcher, a rig or pipe will build up reclaim from natural condensation.
To Read The Ultimate Bucket Banger Buying Guide Click Here!
Enail FAQ
Why Should I Buy an Enail?
An Enail offers the most powerful, precise , effective and efficient dabbing experience possible! Click Here to Read More
What is the Best E-Nail?
There are many different types of enails, between analog, digital, portable, or choosing between the options like hybrid, quartz, titanium, ceramic, different sizes and different brands like High Five, Galaxy, or VapeBrat, the options may seem a little overwhelming. It is best to choose an Enail set up that is most suitable to your wants, needs, and preferences! Click Here to Read More
Which Dab Rig is Best for my E-nail?
Recycler rigs are typically the best for enails and concentrates in general, offering maxing filtration with minimum cooling. With an e-nail, sturdiness and balance is key, this is why we have specifically chosen a few options to offer you that will be perfect for the e-nail being viewed. Click Here to Read More
What difference does the coil size make?
The coil size determines the banger size which is based upon the typical dab size. Is using a Reclaim Catcher a good idea? Reclaim Catchers pay for themselves within the first few usages by keeping the pipe clean while saving some reclaim for later. Click Here to Read More
What temperature should I set my enail to?
The recommended temperature ranges between 450-650 depending upon your preferences. Click here to Read More
How to Dab with and Use an E-Nail?
**** Do not turn the controller box on before the heater coil is plugged into the controller box, if you turn the controller box on before the coil is connected your display screen will read an error code.**** - Plug in all of the parts, connect the nail/banger and rig
- The controller box can now be turned on, most enail controller boxes will have a switch or a button to turn it on and off. (If you see an error code on the display screen after the controller box is turned on and the COIL IS CONNECTED PROPERLY, this may indicate that there is a problem with the coil’s thermocouple. This does NOT mean the unit is faulty.)
- Set the controller box to your desired temperature.(We recommend running your enail controller between 450 and 650 degrees Fahrenheit, running an enail controller higher or lower will result in a less than satisfactory experience while running the risk of damaging the banger.)
- Once the banger/nail is to your desired temperature (usually takes about 30 seconds to heat), pick up the desired amount of concentrates with the tip of a dab tool.
- Place the concentrates on the bottom of the heated surface with the dab tool. (Utilizing the appropriate amount of concentrates based on the size and temperature of the banger or nail, will maximize the cloud size)
- Inhale through the dab rig mouthpiece.
- Plug in all of the parts, connect the nail/banger and rig
- The controller box can now be turned on, most enail controller boxes will have a switch or a button to turn it on and off. (If you see an error code on the display screen after the controller box is turned on and the COIL IS CONNECTED PROPERLY, this may indicate that there is a problem with the coil’s thermocouple. This does NOT mean the unit is faulty.)
- Set the controller box to your desired temperature.(We recommend running your enail controller between 450 and 650 degrees Fahrenheit, running an enail controller higher or lower will result in a less than satisfactory experience while running the risk of damaging the banger.)
- Once the banger/nail is to your desired temperature (usually takes about 30 seconds to heat), pick up the desired amount of concentrates with the tip of a dab tool.
- Place the concentrates on the bottom of the heated surface with the dab tool. (Utilizing the appropriate amount of concentrates based on the size and temperature of the banger or nail, will maximize the cloud size)
- Inhale through the dab rig mouthpiece.
