Description
Galaxy Enail, Pulsar Enail, DabPress Enail & 9 Other Brand Compatible: 25mm Axial Enail Coil
E-nail coils must have the same coil pin setup as the e-nail controller box you are attempting to use it with. When we say "coil pin setup," this is not in reference to the 5 pins, which look to be the same size and configuration. Coil pin setup refers to the internal order of the wires. The 5 wires correspond to the power, temperature control (these wires send temperature feedback to the controller), and ground wire.
This coil pin setup is...
Pin 1 – AC (Power)
Pin 2 – AC (Power)
Pin 3 – TC+ (Thermocouple Positive lead)
Pin 4 – TC− (Thermocouple Negative lead)
Pin 5 – Ground
This coil is therefore compatible with the following brand E-Nail Controller Boxes:
Galaxy E-nails
Pulsar E-Nails
DabPress E-Nails
D-Nail
HexNail
ShatterBox
RCC Tools controllers
Max Vapors
Dab Ninja
AugustHaus
Hedi Nail
Disorderly Conduction controllers
**THIS COIL IS NOT COMPATIBLE WITH VAPEBRAT ENAIL CONTROLLER BOXES**
VAPEBRAT made this coil so that it would work with these other brands. A lot of them have gone out of business, but people still have controller boxes that work and can be used.
The 25mm Axial coil is designed to be paired with a 25mm e-nail banger with a downstem, which can have an 8mm o-clamp attached to it to secure the coil to the banger.
This 25mm axial coil can also be paired with hybrid titanium nails using a 25mm dish, whether the dish is titanium, quartz, or silicon carbide.
The controller checks the voltage difference between TC+ and TC− all the time to find out how hot the coil is. Then, it changes the power to the heater pins to keep the temperature at the desired level (PID control).
Thermocouples are sensitive to polarity.
If the TC+ and TC− wires are reversed, the controller may:
Read wrong temperatures, causing the coil to heat-up to the max, which can be a safety hazard.
Show temperature going down when heating
Not heating up properly, either too low or too high.
This is why coil pin setup matters so much when pairing an enail coil to a enail controller box. Using the incorrect coil for a controller box may cause the device not to work or be a safety hazard.
If you're not sure what pin setup your controller box works with, please get in touch with us for help.
Specifications:
- Length: 4ft
- Coil Connection: 5PIN Female XLR
- Coil Style: Axial
- Coil Size: 25mm
- Fireproof Kevlar Sheath
- Pin Set Up: PIN 1: AC, PIN 2: AC, PIN 3: TC+, PIN 4: TC-, PIN 5: Ground
